| | |
|
WBT-0702.01 Topline
With a 400 ampere continuous current capability, this is the perfect size binding post for demanding applications. A patented clamping mechanism makes it possible for high compression connection of spades and crimped wire ends up to 6mm2 (10AWG). By means of a
collet chucking device, any 4mm2 banana plug can be securely clamped. Milled grooves on both sides of the compression plate provide high strength for connection of spades. No tools are required to provide a secure connection. Finger tight |
US$ 77.00 EA
|
|
|
WBT-0702.11 Signature
Comparable design as the WBT-0702.01 except it is manufactured
using cold rolled 68% copper alloy. The connector is then plated
with a single layer of 24k gold to protect against oxidation. Finally,
it is polished by hand to give an extreme finish. |
US$ 95.00 EA
|
|
|
WBT-0702.12 Signature
This binding post makes use of the same features as the
WBT-0702.11 but with a highly polished platinum finish. |
US$ 95.00 EA
|
|
|
WBT-0710Ag nextgen Signature
A 30 ampere continuous current rating makes this connector sufficient for most audio functions. Made with passivated pure fine silver. Spade lugs measuring 6mm, standard 4 mm2 banana plugs and wire with a diameter of 6mm2 (10AWG) can be accepted. Maximum mounting depth of 4mm without use of puzzle washer. Recommended use with
WBT mounting plates on page 17. Can be terminated with
6.1mm / 0.25 inch quick disconnect found on page 15. |
US$ 85.00 EA
|
|
|
WBT-0710Cu mC nextgen Topline
Brother to the WBT-0710Cu but with a velours chromium tightening nut. |
US$ 55.00 EA
|
|
|
WBT-0710Cu nextgen Topline
With the same manufacturing design as the WBT-0710Ag but created using 99.996% pure oxygen free copper. The connector is then plated with a single layer of 24k gold to protect against oxidation. |
US$ 55.00 EA
|
|
|
WBT-0730.01 Topline
A 200 ampere continuous current rating makes this connector sufficient for most functions. Spade connectors are securely held with a patented high compression design. Wire with a diameter of 6mm2 (10AWG) can also be accepted. Accepts 4 mm2 banana plugs. |
US$ 43.00 EA
|
|
|
WBT-0730.11 Signature
With the same manufacturing design as the WBT-0730.01 but created using cold rolled 68% copper alloy. The connector is then plated with a single layer of 24k gold to protect against oxidation. Finally, it is polished by hand to give an extreme finish. |
US$ 58.00 EA
|
|
|
WBT-0730.12 Signature
Brother to the WBT-0730.11 but with a highly polished platinum finish. |
US$ 58.00 EA
|
|
|
WBT-0735 Topline Safety Line
Utilizing a full insulation of Makrolon, this binding post is part of WBTs safety line and is a CE and IEC compliant version of the WBT-0730.01. |
US$ 48.00 EA
|
|
|
WBT-0763 Midline
A standard binding post for many high end amplifier and loudspeaker companies. This binding post features a patented rotating collar design that requires only finger tightening to securely fasten a spade. Able to handle 200 amperes of continuous current, this is just the right size binding post for nearly all applications. Set screw not included. |
US$ 30.00 EA
|
|
|
WBT-0764 Midline
Screw on printed circuit board version of the WBT-0763, can also accept ring terminal lugs. |
US$ 29.00 EA
|
|
|
WBT-0765 Midline Safety Line
Using full insulation of Makrolon, this binding post is part of WBTs safety line and is a CE and IEC compliant version of the WBT-0763 |
US$ 34.00 EA
|
|
|
WBT-0766 Midline Safety Line
With the same characteristics as the WBT-0765 except this post is designed for direct mounting on printed circuit board with included bolt and lock washer. |
US$ 38.00 EA
|
|
|
WBT-0780 Economy
WBT?s least expensive binding post model featuring a unique finish of velours chromium and is manufactured from brass. Available termination options include crimp, solder and bolt on printed circuit board. Crimp screw and set screw can be purchased separately. |
US$ 28.00 EA
|
|
|
WBT-0785 Economy Safety Line
The WBT-0785 is a safety line version of the WBT-0780. |
US$ 33.00 EA
|
|
